I did the main frame with 2x4's used 14 total. main frame was glued and screwed together. some people have asked ,well how do you level your frame in a garage as they all drain towards the road. its quite easy. level your floor. and if every cut on your stand is right on and all is square then when you go to level your stand it should be off just as much as your floor. so when it is time to move it into your house it will be right on. perfectly level.
i did put in a floor and a top, just for myself, it is not needed but if you plan to use a sump i would at least install a floor, i did the deck as well just in case i decided to go with a acrylic tank in the future it was already there. (these two pieces of ply are NOT glued down. in case of water damage) i can remove and replace with ease. also don't forget to decide on what filtration you are going to use as you will want to be able to get it in your stand . so sections of the stand may have to be off from front to back. as mine are wider in the front then they are on the back. allowing for the doors to open wider for a sump.
http://www.monsterfishkeepers.com/forums/showthread.php?t=92507
Nema komentara:
Objavi komentar